This document describes how to lớn reset and then configure the TP-Link wireless router that may have sầu been supplied with your phamnhan.com SME service. You may need khổng lồ bởi vì this if you have made changes to lớn the router which have resulted in you losing access to the device, or due khổng lồ a forgotten password. These instructions are also valid for a scenario in which the router has accidentally been reset/erased.

Bạn đang xem: How to reset tp

Rephối the router

With the routerpowered on, press và hold the RESETbutton on the baông xã of the router for more than 10 seconds until the system LED starts lớn flash quickly. Then release the button và wait for the router to lớn reboot to lớn its factory mặc định settings.

Preparation Power up the TP-link router. Connect an ethernet cable between port 1 of the phamnhan.com provided NTU & the xanh INTERNET port of the TP-Link router. Connect a computer to any of the TP-Link’s yellow ethernet ports using an ethernet cable. Set up your computer

Normally your computer will will be phối up to lớn automatically obtain it"s IPhường settings. In the case that it isn"t and you have trouble accessing the web management of the router, you can follow the below instructions for Windows computers. The SME phamnhan.com team (sme-phamnhan.com
phamnhan.com.ph) can also direct you to instructions for other platforms if required.

On your computer, go lớn Control Panel > Network & Internet > Network Connections. Clichồng on Ethernet > Properties. Clichồng Internet Protocol Version 4 and clichồng Properties at the bottom. On the General tab, make sure that it is mix lớn ‘Obtain an IPhường address automatically‘ và ‘Obtain DNS Server address automatically’.

*

To check that you have already obtained a dynamic IP address, double click on the Ethernet ibé and cliông xã Details. You should get an IP that starts with 192.168.0.
*
Set up the router mở cửa a web browser & type in 192.168.0.1 Enter the username và password in the login page. The default username & password for TP-Link devices is admin/admin.

*

When you first logged into lớn this device, it will ask you for a new password. phamnhan.com will by mặc định phối the username & password to the same value as for your PPPoE username & password. phamnhan.com SME phamnhan.com can provide these details on request.

*

After you have successfully changed the mặc định username and password, it will redirect you to the Quichồng Setup và will ask you for the Time Zone. SelectGMT+08:00 khổng lồ have sầu the same timezone in Philippines and clichồng Next.

*

For Internet Connection Type, select PPoE and clichồng Next.

*

Enter your PPPoE username và password (as supplied buy phamnhan.com) in the textboxes & cliông xã Next.

*

For the Wireless Settings... Check the checkbox labeled “Enable Wireless Radio” lớn enable the radio. Network Name (SSID) is what you can see when you want to lớn connect to lớn your Wireless network. phamnhan.com will have sầu set this to lớn phamnhan.com_ The Password textbox contains the password that you need to connect khổng lồ your wireless network. Set your password here. The mặc định password is listed on a small sticker on the bachồng of the device. Leave sầu the ‘Hide SSID’ checkbox unchecked if you want your Wireless Network lớn be visible. phamnhan.com will have this unchecked. If you have configured all that is needed, click Next.

Xem thêm: Lập Luận Giải Thích Nhiễu Điều Phủ Lấy Giá Gương, Giải Thích Câu “Nhiễu Điều Phủ Lấy Giá Gương

*
After you click Next, it will show you a summary of the things you configured. If everything looks correct cliông chồng Save sầu, or if you have something you want to change, clichồng Baông chồng.

*

After you clichồng Save, the router will redirect you to lớn a page as below. Just click Log In Later.

*

It will then tell you that you have sầu complete the Quiông xã Setup Process. Cliông chồng Finish.

*

Once finished, it will redirect you lớn a network maps. Go to lớn Advanced Tab > Network > Internet, phối MTU Size lớn 1492 và clichồng Save sầu.

*

Now disable NAT Boost.Go lớn Advanced Tab > System Tools. Uncheck the box labeled "NAT Boost" and cliông xã Save sầu.
*
This will cause the router reboot so the router will ask you if you want to continue. Click OK.

*

The router will now reboot.

*

Once it has rebooted, khổng lồ Advanced tab > System Tools > Traffic Statistics & turn it on. Cliông chồng Save sầu. You are now finished with the setup.

*